Dongguan Life-Style Casting Co.,Ltd
Home > News > Content
Product Categories
Contact Us

Dongguan Life-Style Casting Co.,Ltd

Address: Zhonghuiliyang Shidai, Dongcheng, Dongguan, Guangdong, China 523180

GeneralManager: Sherry Luo

Tel: 86-769-89865086

Mobile: 86-13712854626

Fax: 86-769-89865086

Whatsapp: 86-13712854626



Skype: miaomiao91919

How To Increase The Stability Of Machinery Casting Part

How to increase the stability of Machinery Casting Part
Machinery Casting Parts are a very good industrial part, and this component, with its unique characteristics, plays an important role in many fields, and the performance of such parts can not be replaced by other equipment. Even if this part has many advantages, there are some shortcomings that are a headache problem, such as the stability of the parts is not very good, which is a defective parts, so that the use of such parts of the project caused great risks The How can we increase the stability of the Machinery Casting Part?
Machinery Casting Part manufacturers face their own product defects and did not choose to avoid, but through a variety of experiments, continue to overcome the defects of components. We know that gray iron foundry manufacturers through some of the industrial materials after the combination of casting parts, so in order to solve the defects, only two links can be adjusted, one is the material control, the other is the casting process control, through a series Of the test, the final manufacturers finally found a solution, that is, in the production of materials to add a certain percentage of other raw materials, so that you can increase the stability of parts.
 Machinery Casting Part of the new research and development work from the experience of many people found visible, the eternal development of the most need for innovative technical support, how should the application of the current Machinery Casting Part it? From the support of the real parts design, at least in the existing groundbreaking way, all the industrial design is interested in the direction of the public is always in the gray iron and other devices to attract people. On the infinite variety of new improvements, but also can be more profound to attract people in need.
Industrial development process will always turn from different aspects of the successful conversion of all the experience. According to the development of various Machinery Casting Part design tools in the new industrial period, it is seen that the demand for iron reform is always different for different people. Only in the requirements of the force, the implementation of the industrial sector at the same time can be better accepted by the public. Contact with different periods of iron elements of industrial accessories, such as industrial design optimization is more refined possible.
In view of our different groups feel the Machinery Casting Part parts of the product has a different finishing structure, the future most of the people's feelings just lies in the new situation of the demand for reading.
 Now there are a lot of manufacturers for the demand for Machinery Casting Parts are very large, but because of its low production costs, many manufacturers are self-production, for some of the details of the problem, you need to warm the main, Machinery Casting Part paint problems.
Machinery Casting Part of the coating requirements are very strict, mainly because it is the use of some resin sand to make, if the paint is not qualified, then in the latter part of the time, it is easier to damage the phenomenon.
In addition, to tell you about the more popular coating now, that is, the use of heat treatment process, it can help you direct paint, do not need everyone hands, and it is very small radius of deformation, long-term use, can help everyone Reduce the cost.
It is recommended that all manufacturers in the production, we can strictly in accordance with the requirements to produce Machinery Casting Parts, especially its paint, for the late use is very important.
 In the Machinery Casting Part manufacturers point of view, the product itself, the characteristics of the existence or can not be ignored. The following is the basic characteristics of the introduction of Machinery Casting Part.
First of all, the performance of the product in the clay content is still relatively high, and its own moisture is also relatively low. I am in the process of sanding with the product, should pay attention to the amount of mud and clay content. If the clay content of the higher the sand, then it is in the performance of the pressure rise will also be improved.
In general, we should control the effective bentonite content between 7% and 10%. The amount of clay in the clay and the amount of effective clay should be kept at a considerable level with the amount of clay.
Second, whether it is for the purchase of Machinery Casting Part of the people or in the production, should pay attention to the product of water. Moisture is one of the important factors in determining the product's bond strength and plasticity. If the water is relatively high, then it will cause the clay in the cohesive force on the change, resulting in the decline in the flow of sand problem. And too low water will lead to increased brittleness of the product, there are some defects.